Nice RB1000 Automatic Sliding Gate Operator

Nice Robus RB1000 Automatic Sliding Gate Operator

NICE ROBUS RB1000 AUTOMATIC SLIDING GATE OPERATOR / MOTOR

For sliding gates weighing up to 1000 kg, with Nice BlueBUS technology.

Compatible for operation with Solemyo and Opera systems.

User-friendly:  the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.

Practical:  the control unit and PS124 battery back (optional) can be connected by means of a simple connector and can be housed directly inside Robus.

Advanced: RB1000 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent:  thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light.8 programming levels.

Safe:  acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy:  base and release in pressure die-cast aluminium and epoxy paint finish.

Very quiet:  gear motor on bearings.